Sziasztok. Érintőképernyő telepítése és beállítása 10.04 alá. A nulladik lépés az eszköz ellenőrzése, esetemben egyszerű volt mivel usb illesztővel rendelkező eszközt választottam, mivel az RS232 nembiztos, hogy hack nélkül könnyedén felismertethető. Terminálban add ki:

lsusb

Erre nálam ezt listázza:

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax TouchScreen
Bus 002 Device 002: ID 0458:003a KYE Systems Corp. (Mouse Systems) 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 05e3:0716 Genesys Logic, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Ez tehát a vezérlő:

Bus 002 Device 003: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax TouchScreen

Akkor kezdjünk neki: Főbb lépések:

xorg.conf létrehozása
Egalax driver telepítése
Monitor kalibrálása

Azért írtam ezt a szösszenetet, mivel volt pár probléma a 9.04-ről 10.04 -re váltással. A 9.04 telepítése sem volt Kismiska érintőképernyővel , mivel a gyárilag kiadott meghajtó hibásan működött, és úgy kellett kézzel összehegeszteni a Xorg.conf-ot. (De ezen ügy már a múlt homályába veszett...). Szóval Én friss telepítést dobtam fel egy szűziesen új gépre. 10.04-es Ubuntut pendriveról.

A Xorg.conf létrehozása:

sudo service gdm stop

sudo Xorg -configure

sudo service gdm start

Egalax driver telepítése

eGalax

~~Kezdők kedvéért megsúgom, hogy nemárt ellenőrizni az eszközt, usb esetén az lsusb parancs kiadásával. Nehogy valami más legyen az eszköz. Szóval a nulladik lépés....~~

sudo sh setup.sh

    root@makiworld-desktop:~# sh setup.sh
    (*) Linux driver installer for eGalax Touch controller

    (I) Check user permission: root, you are the supervisor.
    (I) Begin to setup eGalax Touch driver.
    (I) Extract eGalax Touch driver archive to /usr/local/eGalaxTouch32.
    (I) Create eGalaxTouch utility shortcut in /usr/bin.
    (I) Create TKCal tool shortcut in /usr/bin.
    (I) Searching the X input modules directory.
    (I) Check X window version: 1.4.x
    (I) Copy X module: x14/egalax_drv.so to /usr/lib/xorg/modules/input.

    (Q) Which interface of controller do you use?
    (I) [1] RS232 [2] PS/2 [3] USB:

   (Q) Which interface controller do you use?
    (I) [1] RS232 [2] PS/2 [3] USB: 3
    (I) Using interface: USB
    (I) Found a non-HID compliant touch controller.
    (W) No inbuilt kernel module for touch controller found.
    (I) It is needed to build "tkusb" kernel module for touch controller.
    (I) For details, see the document "How to build module.pdf".

A képernyő kalibrálása

sudo eGalaxTouch

cat /proc/bus/input/devices

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0 
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1 
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=mouse0 event2 
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input3
U: Uniq=
H: Handlers=kbd event3 
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=0458 Product=003a Version=0111
N: Name="Genius Optical Mouse"
P: Phys=usb-0000:00:1d.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
U: Uniq=
H: Handlers=mouse1 event4 
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

I: Bus=0003 Vendor=0eef Product=0001 Version=0100
N: Name="eGalax Inc. USB TouchController"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
U: Uniq=
H: Handlers=mouse2 event5 
B: EV=1b
B: KEY=401 0 30000 0 0 0 0 0 0 0 0
B: ABS=f
B: MSC=10

I: Bus=0001 Vendor=10ec Product=0662 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input6
U: Uniq=
H: Handlers=kbd event6 
B: EV=40001
B: SND=6

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mouse1"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

        Option "Device" "events"

Section "ServerLayout"
        InputDevice "EETI" "SendCoreEvents"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "dri"
	Load  "dri2"
	Load  "dbe"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mouse1"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: : integer, : float, : "True"/"False",
        ### : "String", : " Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# []
        #Option     "SWcursor"           	# []
        #Option     "ColorKey"           	# 
        #Option     "CacheLines"         	# 
        #Option     "Dac6Bit"            	# []
        #Option     "DRI"                	# []
        #Option     "NoDDC"              	# []
        #Option     "ShowCache"          	# []
        #Option     "XvMCSurfaces"       	# 
        #Option     "PageFlip"           	# []
	Identifier  "Card0"
	Driver      "intel"
	VendorName  "Intel Corporation"
	BoardName   "82G33/G31 Express Integrated Graphics Controller"
	BusID       "PCI:0:2:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection



### Touch Configuration Beginning ###
Section "InputDevice"
        Identifier "EETI"
        Driver "egalax"
        Option "Device" "usbauto"
        Option "Device" "events"
        Option "Parameters" "/var/lib/eeti.param"
        Option "ScreenNo" "0"
        #Option "SkipClick" "1"
        Option "MinX" "380"
        Option "MinY" "463"
        Option "MaxX" "1570"
        Option "MaxY" "1560"
EndSection
### Touch Configuration End ###

Nos ennyi lett volna, remélem hasznára válik mindenkinek. Pá.